High-Temperature Furnaces with SiC Rod Heating up to 1600 °C

Heating times of 25 - 30 minutes can be achieved, depending on the furnace model and the conditions of use.

Process Control

Function and equipment

LHTCT01_16_3.png
LHTC08_16
Begasungssystem
Ofenraum_SiC
High-temperature furnace LHTCT 01/16
High-temperature furnace LHTC 08/16
Gas supply system for non-flammable protective or reactive gas
Furnace chamber with high-quality fiber materials and SiC heating rods on both sides of the furnace

These powerful laboratory muffle furnaces are available for temperatures up to 1550 °C or 1600 °C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these high-temperature furnaces to all-rounders in the laboratory. Heating times of 25 - 30 minutes can be achieved, depending on the furnace model and the conditions of use.

Standard Equipment

  • Tmax 1550 °C or 1600 °C
  • Working temperature 1500 °C, increased wear and tear must be expected in case of working at higher temperatures
  • Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
  • Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP)
  • Optional flap door (LHTC) which can be used as work platform or lift door (LHTCT) with hot surface facing away from the operator (High-temperature furnace LHTCT 01/16 only with lift door)
  • Switching system with solid-state-relays, power tuned to the SiC rods
  • Easy replacement of heating rods
  • Adjustable air inlet opening, exhaust air opening in the roof
  • Controller C550 (10 programs with each 20 segments)
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

 

Additional equipment

Additional Equipment

  • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
  • Protective gas connection to purge with non-flammable protective or reaction gases, not gas tight
  • Manual or automatic gas supply system
  • Process control and documentation via VCD software package for monitoring, documentation and control

Technical specifications

Model Tmax Inner dimensions in mm Volume Outer dimensions1 in mm Connected Electrical Weight Heating time
  in °C w d h in l W D H2 load in kW connection* in kg in min3
LHTCT 01/16 1550 110 120 120 1.5 340 300 460 3.5 1-phase 18 30
LHTC(T) 03/16 1600 120 210 120 3.0 415 545 490 10.0 3-phase4 30 30
LHTC(T) 08/16 1600 170 290 170 8.0 490 625 540 15.5 3-phase 40 25
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.*Please see page 75 for more information about supply voltage
2Plus maximum 240 mm for models LHTCT when open
3Heating time of the empty and closed furnace up to Tmax −100 K (connected to 230 V 1/N/PE rsp. 400 V 3/N/PE)
4Heating only between two phases

Request for quotation

CAPTCHA

Further products

High-Temperature Furnaces with MoSi₂ Heating Elements up to 1800 °C

See product
LHT 01/17 D

High-Temperature Bottom Loading Furnaces up to 1650 °C

See product

High-Temperature Furnaces with Scale for Determination of Combustion Loss and Thermogravimetric Analysis (TGA) up to 1750 °C

See product

High-Temperature Furnaces with Molybdenum Disilicide Heating Elements with Fiber Insulation up to 1800 °C

See product

High-Temperature Furnaces with SiC Rod Heating and Fiber Insulation up to 1550 °C

See product

High-Temperature Furnaces with Molybdenum Disilicide Heating Elements and Refractory Brick Insulation up to 1700 °C

See product

Catalog

A complete overview of our extensive range of furnaces, ovens and accessories for the laboratory can be found in our “Laboratory” catalog.

view online