Hornos de cazo TBR con recuperador calentamiento por gas, para fundir y mantener el calor
Hasta un 25 % de ahorro de energía frente a los hornos de fusión ordinarios con calentamiento por combustible y evacuación lateral de los gases de escape.
Función y equipamiento
The gas-fired crucible furnaces in the TBR product line fitted with the side exhaust gas discharge provide for optimum energy utilization combined with highest quality melt. Fitted with a burner system including heat-recovery system using a recuperative burner, the energy efficiency of ordinary gas-fired melting furnaces is significantly improved.
Depending on utilization the hot exhaust gases from the crucible furnace are guided through a heat exchanger in order to preheat the combustion air for the burner. The system provides for energy savings of up to 25 % compared to ordinary gas-fired furnaces with side exhaust gas discharge. The higher purchase costs are amortized within a short time.
Standard Equipment as TB Models, but
- Heat exchanger in the exhaust gas duct to preheat the combustion air for the burners
- Energy savings of up to 25 % in comparison to other gas-fired melting furnaces featuring side-wall exhaust gas vents
- Maximum furnace chamber temperature 1100 °C, for melt bath temperatures up to 950 °C
- Required min. gas pressure with full load: 70 mbar
- Over-temperature limiter in furnace chamber for protection against overheating. The limiter switches the heating off when the set limit temperature is reached, and only switches it back on after the temperature has fallen again.
- Low-maintenance furnace chamber control with temperature measurement behind the crucible
- Defined application within the constraints of the operating instructions
Más productos
Catálogo
Puede encontrar una descripción completa de nuestra amplia gama de hornos de fusión y mantenimiento para su fundición en nuestro catálogo "Fundición".
