High-Temperature Bottom Loading Furnaces with Molybdenum Disilicide Heating Elements and Fiber Insulation up to 1650 °C

 The heating all around the cylindrical furnace chamber provides for an opitimal temperature uniformity. 

プロセス制御

機能と設備

LHT01_17LB_Speed
LHT02_17LB_Speed
Tischabsenkung-1.png
Chargenbehaelter_rund.png
LHT_Speed_Heizelemente

The motorized lifting table significantly simplifies the charging of the high-temperature furnaces LHT .. LB Speed. The heating all around the cylindrical furnace chamber provides for an opitimal temperature uniformity. 
 

  • Tmax 1650 °C
  • High-quality heating elements made of molybdenum disilicide offer very good protection against chemical interaction between charge and heating elements
  • Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
  • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
  • Excellent temperature uniformity thanks to three (LHT 02/17 LB Speed) or four-sided (LHT 01/17 LB Speed) heating of the furnace chamber
  • Furnace chamber with a volume of 1 or 2 liters, table with large floor space
  • Precise, motorized toothed belt drive of the table with button operation
  • Opening time of table approx. 30 sec., completely open
  • Exhaust air vent in the roof
  • Type S thermocouple
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
  • Controller P570 (50 programs with each 40 segments)

付加装置

  • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
  • Stackable saggars for loading in up to two or three levels, depending on model
  • Reduced opening time of table to 10 sec., completely open
  • Adjustable air inlet through the floor
  • Process control and documentation via VCD software package 

技術仕様

Model Tmax Work space dimensions2 in mm Charging area in mm Volume Outer dimensions1 in mm Connected Electrical Weight
  in °C w d h w d in l W D H load in kW connection in kg
LHT 01/17 LB Speed 1650 75 110 60 95 130 1 350 590 695 2.9 1-phase 45
LHT 02/17 LB Speed 1650 Ø 115 140 135 135 2 390 590 785 3.3 1-phase 55
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.
2Corresponds to charge saggars with spacer

見積依頼

見積依頼

CAPTCHA
この質問はあなたが人間の訪問者であるかどうかをテストし、自動化されたスパム送信を防ぐためのものです。

顧客テストセンター

この特有プロセスにはどの炉が最適なのでしょうか?答えを見つけるのは容易ではありません。よって弊社ではお客様に弊社の代表的な炉ー多種のサイズで比類の無い現代技術を備えた多様の炉ーを試作目的用に準備しております。