Piece komorowe z obiegiem powietrza o pojemności powyżej 1000 l ogrzewane elektrycznie

These forced convection chamber furnaces are available for maximum operating temperatures of 450 °C, 600 °C or 850 °C and are suitable for a wide range of processes.  Due to their robust and solid design even heavy loads can be heat treated. These furnaces are suited for use with baskets, pallets, and mobile furnace racks. The charging can be carried out with fork lift, pallet truck, or charging trolley. Charging can be simplified by roller conveyors, if necessary also motorized. All furnaces are available with electric heating or gas heating.

Standard Version for Models up to 600 °C

• Tmax 450 °C or 600 °C
• Electrically heated
• Electric heating by means of heater coils
• Horizontal air circulation (type ../HA)
• High air exchange for perfect heat transfer
• Temperature uniformity up to +/− 5 °C according to DIN 17052-1 
• Furnace chamber lined with alloy 1.4301 (DIN)
• High quality mineral wool insulation provides for low outer temperatures
• Inside unlocking device for furnaces with walk-in work space
• Furnace sizes suitable for common charging systems, such as pallets, baskets, etc.
• Double-wing door for furnaces with an internal width of more than 1500 mm (450 °C models). Furnaces for higher temperatures and with smaller sizes are equipped with a single-wing door.
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
• Defined application within the constraints of the operating instructions
• Controller with touch operation B500 (5 programs with 4 segments each)
• NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
• Freeware NTEdit for convenient program input via Excel^TM for Windows^TM on the PC
• Freeware NTGraph for evaluation and documention of firings using Excel^TM for Windows^TM on the PC
• MyNabertherm App for online monitoring of the firing on mobile devices for free download

Standard Version for Models 850 °C

• Tmax 850 °C
• Electrically heated
• Electric heating with heating elements on supports tubes
• Optimal air circulation for your charge by means of adjustable air outlets
• Horizontal air circulation (type ../HA)
• High air exchange provides for perfect heat transfer
• Base frame with 500 mm charging height
• Temperature uniformity up to +/− 5 °C according to DIN 17052-1
• Air baffles made of 1.4828 (DIN)
• High quality mineral wool insulation provides for low outer temperatures
• Furnaces sizes perfectly suited to accommodate common charging systems, e. g. like pallets or pallet boxes
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
• Defined application within the constraints of the operating instructions
• Controller with touch operation B500 (5 programs with 4 segments each)
• NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
• Freeware NTEdit for convenient program input via Excel^TM for Windows^TM on the PC
• Freeware NTGraph for evaluation and documention of firings using Excel^TM for Windows^TM on the PC
• MyNabertherm App for online monitoring of the firing on mobile devices for free download