High-Temperature Bottom Loading Furnaces with Molybdenum Disilicide Heating Elements and Fiber Insulation up to 1650 °C

 The heating all around the cylindrical furnace chamber provides for an opitimal temperature uniformity. 

Sterowanie procesami

Funkcja i wyposażenie

LHT01_17LB_Speed
LHT02_17LB_Speed
Tischabsenkung-1.png
Chargenbehaelter_rund.png
LHT_Speed_Heizelemente

The motorized lifting table significantly simplifies the charging of the high-temperature furnaces LHT .. LB Speed. The heating all around the cylindrical furnace chamber provides for an opitimal temperature uniformity. 
 

  • Tmax 1650 °C
  • High-quality heating elements made of molybdenum disilicide offer very good protection against chemical interaction between charge and heating elements
  • Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
  • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
  • Excellent temperature uniformity thanks to three (LHT 02/17 LB Speed) or four-sided (LHT 01/17 LB Speed) heating of the furnace chamber
  • Furnace chamber with a volume of 1 or 2 liters, table with large floor space
  • Precise, motorized toothed belt drive of the table with button operation
  • Opening time of table approx. 30 sec., completely open
  • Exhaust air vent in the roof
  • Type S thermocouple
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
  • Controller P570 (50 programs with each 40 segments)

Dodatkowe wyposażenie

  • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
  • Stackable saggars for loading in up to two or three levels, depending on model
  • Reduced opening time of table to 10 sec., completely open
  • Adjustable air inlet through the floor
  • Process control and documentation via VCD software package 

Specyfikacja techniczna

Model Tmax Work space dimensions2 in mm Charging area in mm Volume Outer dimensions1 in mm Connected Electrical Weight
  in °C w d h w d in l W D H load in kW connection in kg
LHT 01/17 LB Speed 1650 75 110 60 95 130 1 350 590 695 2.9 1-phase 45
LHT 02/17 LB Speed 1650 Ø 115 140 135 135 2 390 590 785 3.3 1-phase 55
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.
2Corresponds to charge saggars with spacer

Zapytanie ofertowe

Zapytanie ofertowe

CAPTCHA
To pytanie sprawdza czy jesteś człowiekiem i zapobiega wysyłaniu spamu.

Centrum testowe dla klientów

Jaki piec będzie najlepszy do tego specyficznego procesu? Odpowiedź na to pytanie nie zawsze jest prosta. Z tego powodu uruchomiliśmy jedyne w swoim rodzaju, duże i nowoczesne centrum testowe, udostępniające klientom szeroki wybór pieców do testowania.