Fours basculants KB energie gaz, pour la fusion et le maintien à la chaleur
Ils se prêtent excellemment bien aux tâches de fusion.
![](/sites/default/files/styles/product_category_thumbnail/public/2021-02/KB400_12.png?itok=1hEaXZ-H)
Fonction et équipement
Four basculant KB 400/12 avec évacuation des fumées par le bord du creuset
Installation de four de fusion comprenant deux fours basculants KB 360/12 avec échappement latéral et plate-forme de travail
Tilting furnace KB 150/12 in production
Groupe hydraulique avec fluide hydraulique difficilement combustible
Brûleur biétagé monté à demeure sur le bâti du four
Cast copper alloy
The gas-fired tilting furnaces in the KB product lines provide for high melting performance, making them ideal for melting operations. The use of high-quality insulation materials results in very low energy consumption. Designed with an exhaust vent over the crucible edge, these tilting furnaces achieve very high melting rates and optimum energy efficiency.
Standard Equipment for all Tilting Furnaces
- KB ../12 for aluminum and zinc alloys
- KB ../14 for copper alloys such as bronze or brass
- Modern and powerful two-stage burner for high melting capacity and low maintenance operation
- Exhaust gas discharge over the crucible edge
- Multi-layer insulation for optimum energy efficiency and low external wall temperatures
- Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
- Incl. crucible
- Electro-hydraulic tilting device with safe two-hand operation on the furnace
- Uniform and precise pouring due to optimum pivot point
- Emergency outlet for safe discharge of the melt in case of a crucible break
- Integrated safety system which continues to operate the furnace at reduced power in case of malfunction in the thermocouple, in order to prevent the freezing of the melt
- Over-temperature limiter for the furnace chamber with automatic reset to protect against over-temperature. The limit controller switches off the heating when the pre-set limit temperature has been reached and does not switch it on again until the temperature falls below the setting again.
- Low-maintenance furnace chamber control with temperature measurement behind the crucible
- Defined application within the constraints of the operating instructions
Standard Equipment for Tilting Furnaces KB ../14
- Insulation with an additional wear-and-tear layer made of copper-resistant refractory concrete
Équipement supplémentaire
Additional Equipment for all Tilting Furnaces
- Safety fence
- Work platform or platform for easier charging
- Collecting pan under the emergency outlet
Additional Equipment for Tilting Furnaces KB ../12
- Side exhaust gas discharge including cover
- Insulated exhaust gas diverter connecting piece (exhaust flue) for side-wall exhaust gas vent to a connected customer suction system
- Crucible breakage monitoring with optical and acoustic signal
- SMS-alarm message in case of crucible breakage
- Bath control system (only when equipped with side exhaust gas discharge)
- Process control and documentation via Nabertherm Control Center (NCC) for monitoring, documentation and control
Spécifications techniques
Model | Tmax furnace |
Tmax melt bath |
Crucible | Capacity in kg |
Burner output |
Melting performance3,6 in kg/h |
Consumption melting6 kWh/kg |
Consumption holding Lid closed |
Outer dimensions4 in mm |
Weight | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
°C | °C | Al | Zn | Cu | kW | Al | Al | kWh/h | W5 | D | H | in kg | ||
KB 80/12 | 1200 | 1050 | TP 287 | 180 | 470 | - | 300 | 2201 | 1.3 - 1.51 | 10 | 2730 | 1530 | 1680 | 2100 |
KB 150/12 | 1200 | 1050 | TP 412 | 330 | 870 | - | 300 | 2401 | 1.0 - 1.31 | 11 | 2830 | 1630 | 1880 | 2600 |
KB 180/12 | 1200 | 1050 | TP 412 H | 370 | 970 | - | 300 | 2601 | 1.0 - 1.31 | 13 | 2830 | 1630 | 1980 | 2800 |
KB 240/12 | 1200 | 1050 | TP 587 | 570 | 1500 | - | 390 | 4001 | 1.0 - 1.31 | 15 | 3120 | 1840 | 1980 | 3100 |
KB 360/12 | 1200 | 1050 | TBN 800 | 750 | - | - | 450 | 4201 | 1.0 - 1.31 | 17 | 3170 | 1890 | 2080 | 3300 |
KB 400/12 | 1200 | 1050 | TBN 1100 | 1000 | - | - | 450 | 4501 | 1.0 - 1.31 | 19 | 3170 | 1890 | 2150 | 3600 |
Cu | Cu | |||||||||||||
KB 40/14 | 1400 | 1250 | R 400/TP 982 | - | - | 400 | 400 | 3302 | 1.0 - 1.32 | 22 | 2710 | 1530 | 1550 | 2400 |
KB 60/14 | 1400 | 1250 | R 500 | - | - | 500 | 400 | 3602 | 1.0 - 1.32 | 25 | 2710 | 1530 | 1550 | 2700 |
KB 80/14 | 1400 | 1250 | R 600 | - | - | 600 | 400 | 3802 | 1.0 - 1.32 | 25 | 2710 | 1530 | 1710 | 3400 |
1Al at 700 °C 2CuZn at 1000 °C 3The stated melting performances are maximum values. Daily operation comes up to roughly 80 %. 4External dimensions vary when furnace is equipped with additional equipment. Dimensions on request. 5Incl. burner and hydraulic system 6 Values for other materials, e. g. zinc, on request |
Demande de devis
Autres produits
![](/sites/default/files/styles/max_1300x1300/public/2021-07/foundry_english.png?itok=Jfs_A858)
Catalogue
Vous trouverez un aperçu complet de notre vaste gamme de fours de fusion et de maintien pour votre fonderie dans notre catalogue "Fonderie".