Высокотемпературные печи с выдвижным подом и обогревом с помощью стержневых нагревателей из карбида кремния для агломерации при температуре до 1550 °C

Bogie hearth furnaces equipped with SiC rod heating can be used in the production of technical ceramics, especially for sintering at working temperatures up to 1550 °C. The bogie hearth furnaces WHTC with especially robust design can hold heavy charges including kiln furniture. The furnace chamber is equipped with a high-quality insulation made of high-temperature fiber blocks. The bogie insulation is structured in multi-layer lightweight refractory bricks on the heating chamber side.

The furnace is heated along both sides by vertically installed SiC heating rods. This heating technology permits processes requiring working temperatures above 1350 °C which cannot achieved with wire heating elements. The SiC rods are controlled by thyristor controller which counteract the aging of the heating elements by means of automatic power compensation. 

• Tmax 1550  °C
• Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
• Swing door hinged on the right side
• Heating from both sides via vertically mounted SiC rods
• Thyristor controllers with automatic output compensation counteract the aging of SiC rods
• Multi-layer insulation with high-quality fiber modules on the heating chamber side
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
• Bogie for heavy loads lined with lightweight refractory bricks
• Bogie hand driven on rubber tires
• Motorized exhaust air flap on the furnace roof
• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the oven and load
• Defined application within the constraints of the operating instructions
• NTLog Basic for Nabertherm Controller: Recording of process data with USB-flash drive
• Controller with touch operation P570 (50 programs with each 40 segments)
• Freeware NTEdit for convenient program input via Excel^TM for Windows^TM on the PC
• Freeware NTGraph for evaluation and documention of firings using Excel^TM for Windows^TM on the PC
• MyNabertherm App for online monitoring of the firing on mobile devices for free download