二珪化モリブデンヒーター付き高温炉 最高1800 °Cまでのファイバー断熱
コンパクトな標準モデルは、高い動作温度が必要で、かつ、高い精度が求められる少量のガラスのサンプルの溶解、石英ガラスまたはガラスセラミックスの用途向けに適しています。
機能と設備
Thanks to the sturdy design, the high-temperature furnaces fulfill the demands of everyday use in laboratories and production. The compact standard models are particularly suitable for the production of technical ceramics such as bio ceramics or the sintering of CIM components where high working temperatures are needed and high-quality standards are required. The very good temperature uniformity and useful options set high-quality benchmarks and are the optimum solution for many applications. The furnaces can be extended with extra features from our extensive range to suit specific processes.
- Tmax 1600 °C, 1750 °C, or 1800 °C
- Recommended maximum working temperature approx. 50 °C below Tmax of the furnace. Higher working temperatures will increase wear and tear.
- Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
- Heating from both sides via molybdenum disilicide heating elements
- High-quality fiber insulation backed by special insulation
- Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
- Long-life roof insulation with special suspension
- Temperature uniformity at 1450 °C up to +/− 6 °C according to DIN 17052-1
- Chain-guided parallel swivel door for precise opening and closing of the door
- Two-door design (front/back) for high-temperature furnaces from HT 276/..
- Labyrinth sealing ensures the least possible temperature loss in the door area
- Reinforced floor as protection for bottom insulation as standard from models HT 16/16 upwards (distributed load 5 kg/dm2)
- Vapor vent in the furnace roof with motorized exhaust air flap, controlled via the extra function of the controller
- Stainless steel exhaust hood as interface to customer’s exhaust system
- Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
- Defined application within the constraints of the operating instructions
- Controller with touch operation P570 (50 programs with each 40 segments)
その他の製品
カタログ
小型のラボラトリー用炉から 1 つのプロセス内で脱バインダーおよび焼結するためのコンビ炉プラントまで、幅広い製品群の包括的な概要については、カタログ「先端材料」をご覧ください。