Combi Furnace LCA 04/13 LB up to 1280 °C Execution: sintering cobalt-chromium

Good sintering results in an almost oxygen-free atmosphere with low argon consumption are achieved thanks to the unique construction combined with sintering pearls. 

工艺控制
Combi furnace LCA 04/13 LB with sintering bell set

功能与设备

LCA04-13LB-3.png
LCA04-13LB.png
LCA04-13LB-2.png
LCA-Beschickung-Sintern.png
LCA-Durchflussmesser.png
LCA-Hubtisch.png
Combi furnace LCA 04/13 LB with sintering bell set
Sintering furnace LCA 04/13 LB
Sintering furnace LCA 04/13 LB
Charging in sintering furnace LCA 04/13 LB for the sintering of cobalt-chromium
Flowmeter for Argon
Lifting table for rapid cooling

The sintering furnace LCA 04/13 LB is ideal for sintering cobalt-chromium restorations. The restorations are placed in a special sintering bell and heat-treated under argon. Good sintering results in an almost oxygen-free atmosphere with low argon consumption are achieved thanks to the unique construction combined with sintering pearls. The furnace can be freely programmed and therefore used for various materials up to a sintering temperature of 1280 °C.

Designed as a combi furnace, this model can also be equipped with an annealing bell set for stress-relief annealing after laser sintering. Platforms with dimensions up to Ø 10 cm fit this setup. 

Two sample programs, which can be customized for each customer, are already preset. The LCA 04/13 LB furnace is also designed for connection to a single-phase power supply. The lifting table enables rapid cooling. 

Key Facts

  • Working temperature up to 1280 °C
  • Dual shell ventilated housing made of textured stainless steel sheets for low surface temperature and high stability
  • We use only insulation materials that are classified as noncarcinogenic under EU Regulation 1272/2008 (CLP)
  • Gas supply system with solenoid valve and flow meter integrated in furnace chamber
  • Forced cooling system with lifting table function possible
  • Type S thermocouple
  • Single-phase connection
  • Controller with touch operation P580 (50 programs with each 40 segments)
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
  • Freeware NTEdit for convenient program input via ExcelTMfor WindowsTM on the PC
  • Freeware NTGraph for evaluation and documentation of sintering cycles using ExcelTM for WindowsTM on the PC
  • MyNabertherm App for online monitoring of the process on mobile devices for free download
    Defined application within the constraints of the operating instructions

附加设备

Required accessories

Sintering bell set including:

  • Special tongs
  • Sintering disc
  • Sintering bowl
  • Sintering lid
  • Sintering bell
  • Sintering pearls, Ø 1.25 mm (200 g)

技术指标

Model

Tmax

Work space sintering bell
in mm

Charging area 
in mm

Maximum load 

Outer dimensions1 
in mm

Connected load2

Electrical connection*

Weight

Heating time3

 

in °C

Ø

h

Ø

(crowns)

W

D

H

in kW

 

in kg

in min

LCA 04/13 LB

1300

76

34

126

30

380

500

780

3,6

1-phase

32

35

*These furnaces are available for main voltage of 220 V - 240 V, 1/N/PE or 2/PE
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.
2The connected load refers to the standard furnace and may increase for a furnace with additional equipment. 
For furnaces with connection options for multi-range voltages, the connected load applies to the highest permissible connected voltage.
3Heating time of the empty and closed furnace up to Tmax −100 K (connected to 230 V 1/N/PE rsp. 400 V 3/N/PE)

要求报价

验证码

其他产品

Required Accessories for Sintering of Cobalt-Chromium for combi furnace LCA 04/13 LB

详见产品

Combi Furnace LCA 04/13 LB up to 1280 °C Execution: stress-relief annealing after laser sintering

详见产品
Combi furnace LCA 04/13 LB with annealing bell set

目录

在我们的“牙科”目录中可以找到我们广泛的牙科烧结和预热炉以及配件。

在线观看