铝和钢的回火设备

铝合金和钢的多级热处理.

 

工艺控制

功能与设备

FS 1200_60.png
Verguete_FS5350_60AS.png
N644_S_0.png
Fallschachtofenanlage.png

After casting, multi-stage heat treatment is often necessary. For processes such as the T6 heat treatment of aluminum (solution annealing, quenching and ageing) or the hardening of steel, quenching and tempering plants are used. Due to the design consisting of one or more furnaces in combination with a quenching tank or a cooling station, the quenching and tempering process can be carried out manually, semi-automatically or even fully automatically. 

General Properties

  • Multi-stage heat treatment of aluminum alloys and steel
  • Manual, semi-automated or even fully automated
  • Concepts for horizontal or vertical movement of the charge
  • Quenching delay times from start of door opening of only 5 seconds possible
  • Standard sizes and customized solutions available
  • Process data acquisition and consideration of common automotive and aerospace standards such as CQI-9, AMS2750G

Horizontal Quenching and Tempering Plants

In horizontal quenching and tempering plants, the quench tank is positioned in front of the chamber furnace. The charge is transferred horizontally into the furnace by a 2-axis manipulator and, after heat treatment, is removed hot and quenched. As the movement technology in this plant concept is only in the hot furnace chamber for a short time, temperatures of up to 1300 °C are possible.

Drop-Bottom Furnace Plants

Drop-bottom furnaces are used for solution annealing and subsequent rapid quenching of aluminum alloys. Especially for thin-walled aluminum components, quenching delay times of only 5 seconds from the start of door opening to complete immersion in the quenching bath can be realized.

Customized Solutions

The modular design of our systems enables a wide range of design options for the plant and, with appropriate planning, also the possibility of later expansion.

For detailed information, please also see our catalog
Thermal Process Technology.

要求报价

要求报价

验证码

用户测试中心

什么样的炉型最适合您的特殊加工工艺?要回答这个问题并不简单。为此,本公司专门建立了一家大型、先进的技术中心。中心配备有代表性的炉型,供用户进行试验和测试。