Hornos de crisol basculante K calentamiento eléctrico, para fundir y conservar calor

Alto rendimiento de fundición con buena homogeneidad de la temperatura en la masa fundida.

Control de Proceso

Función y equipamiento

K150_12.png
K150_12_und_T180_11
K360_12
K40_13
K300_12x3
K_Bronzeguss
Horno de crisol basculante K 150/12
Horno de crisol basculante K 150/12 y horno de cazo T 180/11 como sistema de fusión previa y de mantenimiento de la temperatura
Carga del cazo de transporte con un horno de crisol basculante K 360/12
Horno de crisol basculante K 40/13 con caño extendido (Fundición de esculturas Knaak)
Three tilting furnaces with work platform for melting of aluminum
Llenado de un molde con bronze líquido (fotografía de Andrea Künstle)

The electrically heated tilting furnaces are characterized by very good melt quality and high melting performance with optimum energy efficiency. They are ideal as a flexible solution for pre-melting but also for direct pouring into large moulds.

  • K ../12 for aluminum and zinc alloys 
  • K ../13 for copper alloys such as bronze or brass
  • Free-radiating heating elements on support tubes for long service life and simple replacement
  • Twelve months warranty on heating elements
  • Multi-layer insulation for optimum energy efficiency and low external wall temperatures
  • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
  • Incl. crucible
  • Electro-hydraulic tilting device with safe two-hand operation on the furnace
  • Uniform and precise pouring due to optimum pivot point
  • Emergency outlet for safe draining of the melt in case of crucible breakage
  • No exhaust gas discharge needed
  • Integrated safety system which continues to operate the furnace at reduced power in case of malfunction in the thermocouple, in order to prevent the freezing of the melt
  • Over-temperature limiter in furnace chamber for protection against overheating. The limiter switches the heating off when the set limit temperature is reached, and only switches it back on after the temperature has fallen again.
  • Low-maintenance furnace chamber control with temperature measurement behind the crucible
  • Defined application within the constraints of the operating instructions

Equipamiento adicional

  • Safety fence
  • Work platform for easy charging
  • Collecting pan under the emergency outlet
  • Crucible breakage monitor with visual and audible signal (only for models K ../12)
  • Bath control with thermocouples in the furnace chamber and in the melt. The furnace temperature is controlled through the melt. Temperature overshoots are reduced, thus the quality of the melt is improved
  • Heating system operated through thyristors
  • Multi-step switching of the furnace heat
  • Models with increased heating power
  • Process control and documentation via Nabertherm Control Center (NCC) for monitoring, documentation and control

Especificaciones técnicas

ModelTmax
furnace		Tmax
melt bath		CrucibleCapacity
in kg		Heating powerMelting performance3,6
in kg/h		Consumption
melting6
kWh/kg		Consumption
holding
Lid closed/open		Outer dimensions5
in mm		Weight
 °C°C AlZnCuin kW4AlAlkWh/hWDHin kg
K 80/1212001050TP 287180470-50126¹0.4¹4/10¹2050152015801750
K 150/1212001050TP 412330870-60147¹0.4¹5/12¹2120160018602250
K 180/1212001050TP 412H370980-60160¹0.4¹5/12¹2120160018602450
K 240/1212001050TP 5875701500-80180¹0.4¹8/17¹2260176018603000
K 360/1212001050TBN 800750--100260¹0.4¹11/20¹2370181019503500
K 400/1212001050TBN 11001050--126295¹0.4¹12/22¹2370193021003700
        CuCu     
K 10/1313001150A 70205070164720.325/821890124014401000
K 20/1313001150A 15045120150206320.325/821890140014601300
K 40/1313001150A 30090240300268420.325/822000145015401650
K 80/1313001150TP 2871804705505019020.326/1122050152015801950
¹Al at 700 °C
2CuZn at 1000 °C
3The specified melting performances are maximum values. In practice, approx. 80 % are achieved.
4Depending on furnace design connected load might be higher
5External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.
6 Values for other materials, e. g. zinc, on request

Solicitud de presupuesto

CAPTCHA
Esta pregunta es para comprobar si usted es un visitante humano y prevenir envíos de spam automatizado.

Vídeos de productos

show list show grid

Más productos

Hornos de crisol basculante KB calentamiento por gas, para fundir y mantener el calor

Al producto

Hornos de crisol basculante KBR con recuperador calentamiento por gas, para fundir y mantener el calor fundición y mantenimiento de Aluminio

Al producto

Hornos de crisol basculante KC calentamiento por barras de SiC, para fundir

Al producto

Accesorios para hornos de cazo y de crisol basculante

Al producto

Catálogo

Puede encontrar una descripción completa de nuestra amplia gama de hornos de fusión y mantenimiento para su fundición en nuestro catálogo "Fundición".

Ver en linea