Piece przechylne K ogrzewane elektrycznie, do topienia i utrzymywania ciepła
Duża wydajność topienia z dobrą równomiernością temperatury stopu ciekłego.
Duża wydajność topienia z dobrą równomiernością temperatury stopu ciekłego.
The electrically heated tilting furnaces are characterized by very good melt quality and high melting performance with optimum energy efficiency. They are ideal as a flexible solution for pre-melting but also for direct pouring into large moulds.
Model | Tmax furnace | Tmax melt bath | Crucible | Capacity in kg | Heating power | Melting performance3,6 in kg/h | Consumption melting6 kWh/kg | Consumption holding Lid closed/open | Outer dimensions5 in mm | Weight | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
°C | °C | Al | Zn | Cu | in kW4 | Al | Al | kWh/h | W | D | H | in kg | ||
K 80/12 | 1200 | 1050 | TP 287 | 180 | 470 | - | 50 | 126¹ | 0.4¹ | 4/10¹ | 2050 | 1520 | 1580 | 1750 |
K 150/12 | 1200 | 1050 | TP 412 | 330 | 870 | - | 60 | 147¹ | 0.4¹ | 5/12¹ | 2120 | 1600 | 1860 | 2250 |
K 180/12 | 1200 | 1050 | TP 412H | 370 | 980 | - | 60 | 160¹ | 0.4¹ | 5/12¹ | 2120 | 1600 | 1860 | 2450 |
K 240/12 | 1200 | 1050 | TP 587 | 570 | 1500 | - | 80 | 180¹ | 0.4¹ | 8/17¹ | 2260 | 1760 | 1860 | 3000 |
K 360/12 | 1200 | 1050 | TBN 800 | 750 | - | - | 100 | 260¹ | 0.4¹ | 11/20¹ | 2370 | 1810 | 1950 | 3500 |
K 400/12 | 1200 | 1050 | TBN 1100 | 1050 | - | - | 126 | 295¹ | 0.4¹ | 12/22¹ | 2370 | 1930 | 2100 | 3700 |
Cu | Cu | |||||||||||||
K 10/13 | 1300 | 1150 | A 70 | 20 | 50 | 70 | 16 | 472 | 0.32 | 5/82 | 1890 | 1240 | 1440 | 1000 |
K 20/13 | 1300 | 1150 | A 150 | 45 | 120 | 150 | 20 | 632 | 0.32 | 5/82 | 1890 | 1400 | 1460 | 1300 |
K 40/13 | 1300 | 1150 | A 300 | 90 | 240 | 300 | 26 | 842 | 0.32 | 5/82 | 2000 | 1450 | 1540 | 1650 |
K 80/13 | 1300 | 1150 | TP 287 | 180 | 470 | 550 | 50 | 1902 | 0.32 | 6/112 | 2050 | 1520 | 1580 | 1950 |
¹Al at 700 °C 2CuZn at 1000 °C 3The specified melting performances are maximum values. In practice, approx. 80 % are achieved. 4Depending on furnace design connected load might be higher 5External dimensions vary when furnace is equipped with additional equipment. Dimensions on request. 6 Values for other materials, e. g. zinc, on request |
Kompletny przegląd naszej szerokiej oferty pieców do topienia i pieców podgrzewających można znaleźć w naszym katalogu „Foundry”.