Piece komorowe z obiegiem powietrza do temperatury 850 °C do usuwania lepiszcza
Piece wyposażone w pakiet usuwania lepiszcza DB200 mają dmuchawę powietrza świeżego, która tłoczy świeże podgrzane powietrze do komory pieca.
Funkcja i wyposażenie
Forced convection chamber furnaces equipped with a passive safety system are suitable for pure debinding processes. With their air circulation, these furnaces provide very good temperature uniformity and very good heat transfer into the product. Equipped with the DB200 debinding package, the furnaces have a fresh air fan which supplies preheated fresh air into the furnace chamber. The PLC control system monitors all functions which are relevant for debinding to protect the operator and the surrounding. In addition, a slight underpressure is ensured in the furnace via an exhaust gas fan with variable speed, so that the exhaust gases are actively removed from the furnace during debinding. Consequently, the forced convection chamber furnaces can be used flexibly for various applications from development through to production.
- Tmax 600 °C, 650 °C or 850 °C
- Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
- Temperature uniformity according to DIN 17052-1 to +/- 5 °C
- Optimum air distribution ensured with high flow rates
- Double door from an interior width of 1500 mm and above (450 °C models), higher temperatures and smaller sizes are equipped with a single, right-hinged door
- Motor-driven exhaust air flaps in the furnace roof for separate discharge of the exhaust gases during debinding and the exhaust air during cooling (850 °C models with Stainless steel hood for discharge of exhaust gases/exhaust air)
- Over-temperature limiter with manual reset as over-temperature protection for the furnace and the charge
- Debinding package DB200
- Professional solution for large amounts of binder and changing debinding processes
- Fresh air fan, fresh air preheater and monitoring of fresh air and exhaust gas flow rates
- Separate discharge of exhaust gases during debinding and exhaust air during cooling via separate outlets with motor-driven flaps
- Extendable with catalytic or thermal post combustion for a single furnace or alternating operation with two furnaces
- Performance of the debinding package customized to the process requirements
- Defined application within the constraints of the operating instructions
Katalogu
Kompletny przegląd naszej szerokiej oferty obejmującej od niewielkiego pieca laboratoryjnego aż po w pełni automatyczne piece uniwersalne umożliwiające usuwanie lepiszcza i spiekanie w ramach jednego procesu można znaleźć w naszym katalogu „Advanced Materials”.