Высокотемпературные печи с нагревательными элементами из дисилицида молибдена и изоляцией из легких огнеупорных кирпичей до 1700 °C

Надежная изоляция огнеупорным легковесным кирпичом со специальной промежуточной изоляцией.

Управление процессами

Функции и оборудование

HFL16_17DB50.png
HFL160_17_fmt.jpeg
HT_Begasungssystem.png
HFL_TE_Durchfuehrung_fmt.jpg
HFL_Isolierung_fmt.jpg
HFL_Heizelementschutz.png

High-temperature furnaces HFL 16/16 - HFL 160/17 have a sturdy cladding made from refractory insulation. This design offers better protection if the process produces aggressive gases or acids, such as when glass is melted. 

  • Like high-temperature furnaces HT, except:
  • Tmax 1600 °C or 1700 °C
  • Robust refractory brick insulation and special backing insulation
  • Furnace floor made of lightweight refractory bricks accommodates higher charge weights
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Дополнительное оборудование

  • Cooling system to cool the furnace with a defined temperature gradient or with a preset fresh air volume. Both operating modes can be switched on and off for different segments by means of the extra function of the controller.
  • Thermocouple inlet with screw cap
  • Thermocouple for the heating control with calibration certificate
  • Protective gas connection to purge with non-flammable process gases (not completely gas-tight)
  • Automatic gas supply system with solenoid valve and rotameter, controlled by the extra function of the controller
  • Lift door
  • Automatic door lock incl. door contact switch
  • Heating elements protected against mechanical damage
  • Ethernet interface

Спецификации

ModelTmaxInner dimensions in mmVolumeOuter dimensions1 in mmConnectedElectricalWeight
 in °Cwdhin lWDHload in kWconnectionin kg
HFL 16/161600200300260161010890199012.53-phase2530
HFL 40/161600300350350401140940226012.53-phase735
HFL 64/161600400400400641240990231018.53-phase910
HFL 160/16160050055055016014101240249021.53-phase1290
            
HFL 16/171700200300260161010890199012.53-phase2530
HFL 40/171700300350350401140940226012.53-phase735
HFL 64/171700400400400641240990231018.53-phase910
HFL 160/17170050055055016014101240249021.53-phase1290
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.
2Heating only between two phases

Запрос коммерческого предложения

Запрос коммерческого предложения

CAPTCHA
Этот вопрос задается для того, чтобы выяснить, являетесь ли Вы человеком или представляете из себя автоматическую спам-рассылку.

Экспериментальный цех

Какая печь оптимально соответствует тому или иному процессу? Найти ответ на этот вопрос не всегда просто. В связи с этим мы располагаем уникальным экспериментальным цехом, которому нет равных по масштабу и многообразию процессов. В нем заказчики могут опробовать образцы, представляющие широкий ассортимент наших печей