Piece wysokotemperaturowe z elementami grzewczymi z dwukrzemku molibdenu i izolacją z cegły ogniotrwałej do 1700 °C

Wytrzymała izolacja z cegły ogniotrwałej ze specjalną izolacją części tylnej.

Sterowanie procesami

Funkcja i wyposażenie

HFL16_17DB50.png
HFL160_17_fmt.jpeg
HT_Begasungssystem.png
HFL_TE_Durchfuehrung_fmt.jpg
HFL_Isolierung_fmt.jpg
HFL_Heizelementschutz.png

High-temperature furnaces HFL 16/16 - HFL 160/17 have a sturdy cladding made from refractory insulation. This design offers better protection if the process produces aggressive gases or acids, such as when glass is melted. 

  • Like high-temperature furnaces HT, except:
  • Tmax 1600 °C or 1700 °C
  • Robust refractory brick insulation and special backing insulation
  • Furnace floor made of lightweight refractory bricks accommodates higher charge weights
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Dodatkowe wyposażenie

  • Cooling system to cool the furnace with a defined temperature gradient or with a preset fresh air volume. Both operating modes can be switched on and off for different segments by means of the extra function of the controller.
  • Thermocouple inlet with screw cap
  • Thermocouple for the heating control with calibration certificate
  • Protective gas connection to purge with non-flammable process gases (not completely gas-tight)
  • Automatic gas supply system with solenoid valve and rotameter, controlled by the extra function of the controller
  • Lift door
  • Automatic door lock incl. door contact switch
  • Heating elements protected against mechanical damage
  • Ethernet interface

Specyfikacja techniczna

ModelTmaxInner dimensions in mmVolumeOuter dimensions1 in mmConnectedElectricalWeight
 in °Cwdhin lWDHload in kWconnectionin kg
HFL 16/161600200300260161010890199012.53-phase2530
HFL 40/161600300350350401140940226012.53-phase735
HFL 64/161600400400400641240990231018.53-phase910
HFL 160/16160050055055016014101240249021.53-phase1290
            
HFL 16/171700200300260161010890199012.53-phase2530
HFL 40/171700300350350401140940226012.53-phase735
HFL 64/171700400400400641240990231018.53-phase910
HFL 160/17170050055055016014101240249021.53-phase1290
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.
2Heating only between two phases

Zapytanie ofertowe

Zapytanie ofertowe

CAPTCHA
To pytanie sprawdza czy jesteś człowiekiem i zapobiega wysyłaniu spamu.

Centrum testowe dla klientów

Jaki piec będzie najlepszy do tego specyficznego procesu? Odpowiedź na to pytanie nie zawsze jest prosta. Z tego powodu uruchomiliśmy jedyne w swoim rodzaju, duże i nowoczesne centrum testowe, udostępniające klientom szeroki wybór pieców do testowania.