High-Temperature Furnaces with SiC Rod Heating up to 1600 °C

Heating times of 25 - 30 minutes can be achieved, depending on the furnace model and the conditions of use.

Process Control

Function and equipment

LHTCT01_16_3.png
LHTCT01_16_Dental_.png
LHTC08_16
Begasungssystem_fmt1.jpg
Ofenraum_SiC
High-temperature furnace LHTCT 01/16
High-temperature sintering furnace LHTCT 01/16
High-temperature furnace LHTC 08/16
Gas supply system for non-flammable process gas
Furnace chamber with high-quality fiber materials and SiC heating rods on both sides of the furnace

These powerful laboratory muffle furnaces are available for temperatures up to 1550 °C or 1600 °C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these high-temperature furnaces to all-rounders in the laboratory. Heating times of 25 - 30 minutes can be achieved, depending on the furnace model and the conditions of use.

Standard Equipment

  • Tmax 1550 °C or 1600 °C
  • Working temperature 1500 °C, increased wear and tear must be expected in case of working at higher temperatures
  • Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
  • Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP)
  • Optional flap door (LHTC) which can be used as work platform or lift door (LHTCT) with hot surface facing away from the operator (High-temperature furnace LHTCT 01/16 only with lift door)
  • Switching system with solid-state-relays, power tuned to the SiC rods
  • Easy replacement of heating rods
  • Adjustable air inlet opening, exhaust air opening in the roof
  • Controller with touch operation C550 (10 programs with each 20 segments)
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

 

Additional equipment

Additional Equipment

  • Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
  • Protective gas connection to purge with non-flammable process gases, not gas tight
  • Manual or automatic gas supply system
  • Process control and documentation via VCD software package for monitoring, documentation and control

Technical specifications

ModelTmaxInner dimensions in mmVolumeOuter dimensions1 in mmConnectedElectricalWeightHeating time
 in °Cwdhin lWDH2load5 in kWconnectionin kgin min3
LHTCT 01/1615501101201201.53403354853.51-phase2030
LHTC(T) 03/1616001202101203.04155454908.53-phase43830
LHTC(T) 08/1616001702901708.049062554012.53-phase5825
1External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.
2Plus maximum 255 mm for models LHTCT when open4Heating only between two phases
3Heating time of the empty and closed furnace up to Tmax −100 K (connected to 230 V 1/N/PE rsp. 400 V 3/N/PE)
5The connected load refers to the standard furnace and may increase for a furnace with additional equipment. For furnaces with connection options for multi-range voltages, the connected load applies to the highest permissible connected voltage.

Request for quotation

CAPTCHA

Further products

High-Temperature Furnaces with MoSi₂ Heating Elements up to 1800 °C

See product
LHT 01/17 D

High-Temperature Bottom Loading Furnaces with molybdenum disilicide heating elements and fiber insulation up to 1650 °C

See product
LHT02_17LB Speed_Dental

High-Temperature Furnaces with Scale for determination of combustion loss and thermogravimetric analysis (TGA) up to 1750 °C

See product
High-temperature furnace LHT 04/17 SW with scale for measuring weight reduction during annealing

Combi High-Temperature Furnace LHT 08/17 BO up to 1750 °C with integrated catalytic post combustion

See product
Combi furnace LHT 08/17 BO

High-Temperature Furnaces with Molybdenum Disilicide Heating Elements and Fiber Insulation up to 1800 °C

See product

High-Temperature Furnaces with SiC Rod Heating and Fiber Insulation up to 1550 °C

See product

High-Temperature Furnaces with Molybdenum Disilicide Heating Elements and Refractory Brick Insulation up to 1700 °C

See product

Catalog

A complete overview of our extensive range of furnaces, ovens and accessories for the laboratory can be found in our “Laboratory” catalog.

view online