Sintering Furnace for Super Speed Processes LHT 01/16 Turbo Fire up to 1600 °C
The entire sintering process can be completed within one hour.
Function and equipment
The sintering furnace LHT 01/16 Turbo Fire was developed for the super speed sintering of up to 6 single crowns or a 4-unit bridge made of translucent zirconium oxide up to a maximum temperature of 1600 °C.
The entire sintering process can be completed within one hour. The furnace ideally suited for chairside applications. The special heating elements avoid chemical interactions between the charge and the furnace components as best as possible.
The crowns are placed in a saggar made of technical ceramics. The starter set for charging is already included in the scope of delivery. It can be programmed for all common temperature curves for super speed sintering zirconium oxide.
The lifting table can be opened for rapid, controlled cooling, depending on the program.
Key Facts
- Usable for super-speed sintering of zirconium oxide of all leading manufacturers
- Ideal for chairside use
- Maximum heating rate up to 1000 °C (starting from 220 °C/min)
- Fastest cooling time to 300 °C in 25 minutes
- Up to 6 single crowns or a 4-unit bridge can be sintered within 39 minutes
- Very good temperature uniformity due to allround heating of the furnace chamber
- Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
- Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
- Precise, motorized toothed belt drive of the lifting table
- Controller with touch operation P580 (50 programs with each 40 segments), 2 preset sample programs
- MyNabertherm App for online monitoring of the firing on mobile devices for free download
- Freeware NTEdit for convenient program input via ExcelTM for WindowsTM on the PC
- Freeware NTGraph for evaluation and documentation of firings using ExcelTM for WindowsTM l on the PC
- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
- Defined application within the constraints of the operating instructions
Further products
Catalog
A complete overview of our extensive range of sintering and preheating furnaces and accessories for the dental sector can be found in our “Dental” catalog.
